Lg Electronics LST2300 Manual De Usuario

LGIC CDMA Fixed Wireless Terminal

LST-230(F) / 2300(F)

Disable the Hot Line Feature

1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode.

2. Press “#” and Hot Line Disable code “2”.

3. Press “*” to save.

Programming the Hot Line Time

1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode.

2. Press “#” and Hot Line time code “3”.

3. Press “#” and enter desired Hot Line time (1~10 seconds).

4. Press “*” to save.

If Hot Line is disabled and Hot Line number has been already programmed, you can make enable Hot
Line feature by pressing “#’+”#”+”3”+”#”+”1”+”*” without entering a Hot Line Number again.

5.4 Alarm(Enblock mode only)

If alarm feature is enabled, you will hear ring at the programmed alarm time every day for 1 minute.

Entering Alarm Time (12-hour Mode)

1. Press “#”+”#”+”4” continuously to enter alarm time programming mode.

2. Press “#” and alarm time code “1” for 12-hour mode.

3. Press “#” and alarm time (HHMM +am(“1”) / pm(“2”)).

4. In the forenoon, time range is 0000~1159.

5. In the afternoon, time range is 1230~1259 or 0100 ~1159.

6. Press “*” to save and enable Alarm Time.

Entering Alarm Time (24-hour Mode)

1. Press “#”+”#”+”4” continuously to enter alarm time programming mode.

2. Press “#” and alarm time code “2” for 24-hour mode.

3. Press “#” and alarm time (HHMM). (0000~2359)

4. Press “*” to save and enable Alarm Time.

Disable Alarm Feature

1. Press “#”+”#”+”4” continuously to enter alarm time programming mode.

2. Press “#” and alarm disable code “2”.

3. Press “*” to save.

If Alarm is disabled and time has been already programmed, you can make enable Alarm feature by
pressing “#’+”#”+”4”+”#”+”1”+”*” without entering alarm time again.