KYE Systems Corp GMZK3 Manual De Usuario
English
1
Hardware Installation
Note: Supports Windows 7/Vista/XP
1. Connect the receiver to a USB port of a PC.
2. Install one AA or AAA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.
1. Connect the receiver to a USB port of a PC.
2. Install one AA or AAA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.
Mouse Button Assignments
1. Left Button: Provides traditional mouse functions
like click, double click and drag.
2. Magic-Roller: Press the “Magic-Roller” to surf
the Internet and Windows documents.
3. Right Button: Provides traditional mouse click
functions.
4. DPI adjustment: Default is 1600 dpi, press once
for 800 dpi. Quick flashing is 1600 dpi, medium
flashing is 1200 dpi, and slow flashing is 800 dpi.
flashing is 1200 dpi, and slow flashing is 800 dpi.
Note: Download the programmable driver from our
website: www.geniusnet.com
Warning: (Troubleshooting)
1. The connection of the wireless device is factory preset, so when you plug the
USB receiver into any USB port, the connection between the micro receiver and
the mouse will be established automatically.
the mouse will be established automatically.
2. In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under Device
Manager to remove the mouse then plug in the micro receiver to a USB port
again.
Manager to remove the mouse then plug in the micro receiver to a USB port
again.
3. If you feel the mouse does not move smooth as usual, it is possible the battery has
lost its charge so you need to replace it. Remember to put the battery in the correct
direction.
direction.