Biolase Inc. EPIC-1 Manual De Usuario
EPIC™10 User Manual
pg. 14
5400525 Rev B
Power Switch
The laser console can be switched ON (I) or OFF (O) using the Power Switch on the back of the
console.
console.
Figure 3.1: Power Switch, DC Power Input,
Remote Interlock
Figure 3.2: Power Supply Module with cord
CAUTION:
Use only the Power Supply Module (BIOLASE Part Number 2400129) supplied
with the EPIC 10 laser system.
with the EPIC 10 laser system.
Access Key Code
The Access Key Code prevents unauthorized use of the system. It is activated every time
system is turned on with the Power Switch (refer to Section 4 for code).
system is turned on with the Power Switch (refer to Section 4 for code).
NOTE:
Placing the laser in SLEEP mode by pressing and holding the Control button on the
front panel does not re-set the Access Key Code. Turn the Power Switch OFF (O)
only when the system will not be in use for a long period of time.
front panel does not re-set the Access Key Code. Turn the Power Switch OFF (O)
only when the system will not be in use for a long period of time.
Control Button
Once the power switch is set to the ON (I) position, enter the access key code. After setting the
desired parameters for a procedure, press the CONTROL button on the control panel to enter
into READY mode. The aiming beam will illuminate to indicate that the system is ready for use.
desired parameters for a procedure, press the CONTROL button on the control panel to enter
into READY mode. The aiming beam will illuminate to indicate that the system is ready for use.
Wireless Footswitch
The EPIC will not emit laser energy until the user presses down on the Footswitch while the
laser is in READY mode. The footswitch is designed to work using wireless technology.
laser is in READY mode. The footswitch is designed to work using wireless technology.
Power Switch
DC Power
Remote Interlock