Collage Investments LLC. S2AD Manual De Usuario
4
always turn off the power before installing or replacing the SIM card.
Note: The battery can’t be uninstalled.
To remove the back cover
1. Make sure your device is turned off.
Note: The battery can’t be uninstalled.
To remove the back cover
1. Make sure your device is turned off.
2. Firmly hold the device with both hands and the front panel facing down.
3. Push the back cover up with your thumbs until it disengages from the device and then slide it
up to remove.
To install the SIM card
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/ message memory.
1. Remove the battery if it is installed.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and
its cut-off corner facing out the card slot.
Note: The phone can be supported the double SIM cards. Your phone is supported both 2G SIM
card and 3G SIM card.
You can select primary card, primary card supports 3G/2G service, secondary card only supports
2G service.
Some legacy SIM cards may not function with your device. You should consult with your
service provider for a replacement SIM card. There may be fees for this service.
To install a memory card
You can select primary card, primary card supports 3G/2G service, secondary card only supports
2G service.
Some legacy SIM cards may not function with your device. You should consult with your
service provider for a replacement SIM card. There may be fees for this service.
To install a memory card
To have additional storage for your images, videos, music, and files, you can purchase a memory
card and install it into your device.
1. Make sure that your device is turned off, and then remove the back cover.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it clicks into
place.
Note: To remove the memory card, press it to eject it from the slot.
1.3 Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you charge the battery. Some batteries perform best after several full
charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
Connect the USB connector of the AC adapter to the sync connector on your device, and then
plug in the AC adapter to an electrical outlet to start charging the battery.
As the battery is being charged while the device is on, a charging icon appears in the title bar of
the Home screen. After the battery has been fully charged, a full battery icon appears in the title
bar of the Home screen.
Warning: • As a safety precaution, the battery stops charging before it overheats.
1.4 Starting up the device
card and install it into your device.
1. Make sure that your device is turned off, and then remove the back cover.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it clicks into
place.
Note: To remove the memory card, press it to eject it from the slot.
1.3 Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you charge the battery. Some batteries perform best after several full
charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
Connect the USB connector of the AC adapter to the sync connector on your device, and then
plug in the AC adapter to an electrical outlet to start charging the battery.
As the battery is being charged while the device is on, a charging icon appears in the title bar of
the Home screen. After the battery has been fully charged, a full battery icon appears in the title
bar of the Home screen.
Warning: • As a safety precaution, the battery stops charging before it overheats.
1.4 Starting up the device
Power on/off
To power off your phone, press & hold POWER. On release, the Phone options menu opens.
To power off your phone, press & hold POWER. On release, the Phone options menu opens.