Badger Meter Inc 2010H Manual De Usuario

Page 13

1-11

The PowerBoot Module™ that contains the batteries is shipped detached from the unit. Before operating the Trimble Ranger, 

the PowerBoot should be charged. The AC charger that ships with your unit has adapters to fit most electrical outlets. Connect 

the appropriate outlet adapter to the AC charger. Plug the charger into an electrical outlet and plug the barrel end of the char-

ger into the PowerBoot. Charge the PowerBoot Module for approximately 4.5 hours.

Be sure to always use the charger included with your unit. Use of other chargers will void warranty.

Align the PowerBoot Module with the unit, with the contacts facing down. Insert the top end of the PowerBoot Module first 

as shown, and then drop the PowerBoot Module into the unit. Secure by firmly tightening the two screws with a coin or a 

screwdriver.

Insert one end of the hand strap onto the two small bolts located on the back of the unit.

Stretch the strap and insert the other end onto the two bolts located near the bottom of the PowerBoot Module.