Badger Meter Inc 2010W Manual De Usuario

The following instructions are provided to properly install an ORION endpoint in any indoor, outdoor, or pit application. Prior 

to beginning the installation procedure, ensure that the following items are available.

•

Remote Installation Bracket Kit (RTR

®

), 64394-019 or Remote Installation Bracket Kit (ADE

®

), 64394-020

•

Two customer-supplied screws

•

Screwdriver and drill

The Remote Installation Bracket securely mounts an ORION endpoint. For non-submerged indoor and outdoor applications, 

the installation bracket can also be used to enclose gel-cap, wire-splice connections to protect them from the environment 

and to prevent tampering in any indoor or outdoor non-metallic joist, wall or pit application.

To install the bracket to the housing, follow these steps.

1.  Place the encoder cable harness through the slit in the bracket, with the screw holes at the bottom.

Note: Carefully slide the cable harness through the slit in the bracket. 

2.  For non-submerged indoor and outdoor applications where splicing is necessary, splice connections together and 

wrap any cables inside the base of the housing. Splice connections made in pit environments require a pit field-splice 

kit (xxxxx-xxx), which can be ordered separately.

Slit

Screw Holes

Page 12

                   (12-10)