Badger Meter Inc 2014GW-GXY Manual De Usuario

The gateway can be ordered with a 10-foot DC power source cable (66233-020) for direct connection with a  

customer-supplied DC power source . The power requirements for the gateway are a DC voltage source between 12…24 V DC . 

Power cable lengths may be limited by the voltage of the DC source . Current consumption requirements will vary with the 

type of DC source as follows:

• 

When connecting to a switching AC/DC power source, as with an AC-to-DC power supply, the electrical requirement 

is 500 mA (minimum) @ 15V DC and may be used with a Badger Meter power cable length up to 300 feet long 

(66233-013) .

• 

When connecting directly to batteries, as in the case of a solar assembly, the electrical requirement is 300 mA 

(minimum) @ 12V DC . However, when using 12V DC, the maximum length of the Badger Meter power cable is limited 

to 100 feet (66233-010) due to voltage drop .

Consult appropriate electrical, building and industry codes, regulations and standards for accepted installation 

practices when attaching the cable to a DC power source .

DC Power Source 

(customer supplied)

10-foot DC Power Source Cable 

with 308 In-line Connector End 

(supplied) 

Power Cable with

308 In-line Connector 

(supplied)

*The enclosure may be recommended but is not included .