Badger Meter Inc 2014GWSE Manual De Usuario

• 

The ORION SE II network gateway transceiver requires access to power . The gateway can use a 120V AC grounded 

outlet for use with the AC-to-DC power supply and power cord (PN: 66528-002), or a DC power source for use with 

the DC power source cable with 308 in-line connector (PN:  66233-020) . 

For a gateway with a LAN PoE configuration, 

a Power over Ethernet connection is required . Diagrams of each power source configuration start on 

 .

• 

Outlet and enclosure (if required) should be mounted for easy accessibility by authorized utility personnel at the 

installation site . 

• 

Consult the appropriate electrical, building and industry codes, regulations and standards for accepted installation 

practices for use of the AC-to-DC power supply and outlet in environmentally controlled indoor locations . 

AC-to-DC power supply used outdoors or in a non-environmentally controlled indoor location requires a customer-supplied 

NEMA 4 enclosure, or equivalent, installed in accordance with appropriate electrical codes, building codes, industry codes, 

regulations and standards .

These are the standard recommended installation configurations with various combinations of backhaul and power source:

• 

GPRS with 120V AC power source

• 

LAN with 120V AC power source

• 

GPRS with DC power source

• 

LAN with DC power source

• 

LAN with PoE power source

Diagrams of the above configurations are shown on the pages that follow . Consult the diagram for your  

installation configuration .