Badger Meter Inc 2018HHMESE Manual De Usuario
MMORTANT
I
Make sure the Ranger 7 is powered off before connecting or
removing a module.
1. On the back of the Ranger 7, use a Phillips #1 screwdriver to
loosen the two (2) screws on the module bay cover to remove it.
OTEE:
N
Store the module bay cover somewhere safe for potential
future use.
2. Hook the ORION module onto the Ranger 7, making sure that
the slots on the top of the device line up with those on
the module.
OTEE:
N
The module bay can accommodate one or both ORION
modules (ME and CE), side-by-side.
2
MMORTANT
I
Make sure the Ranger 7 is powered off before connecting or
removing a module.
1. On the back of the Ranger 7, use a Phillips #1 screwdriver to
loosen the two (2) screws on the module bay cover to remove it.
OTEE:
N
Store the module bay cover somewhere safe for potential
future use.
2. Hook the ORION module onto the Ranger 7, making sure that
the slots on the top of the device line up with those on
the module.
OTEE:
N
The module bay can accommodate one or both ORION
modules (ME and CE), side-by-side.
2
3. Tighten the two (2) captive screws at the bottom of the module
using a Phillips #1 screwdriver. Do not overtighten the screws.
4. Repeat steps 2 and 3 to install the second ORION module,
if necessary.
5. Attach antenna to each module by threading it on the
antenna connector at the top of the module until it is tight.
Do not overtighten.
3
3. Tighten the two (2) captive screws at the bottom of the module
using a Phillips #1 screwdriver. Do not overtighten the screws.
4. Repeat steps 2 and 3 to install the second ORION module,
if necessary.
5. Attach antenna to each module by threading it on the
antenna connector at the top of the module until it is tight.
Do not overtighten.
3
DRAFT