Badger Meter Inc MUSBPWR Manual De Usuario

GPS Receiver

The GPS is built into the Panasonic Toughbook laptop, and is always assigned to 

COM3   

 

If you are running ORS on a non-Badger Meter supplied computer, assign the 

appropriate COM port per the manufacturer's instructions  

Display GPS readings in a List View format without displaying a map 

The time (in milliseconds) before notification is given indicating the receiver is not 

receiving satellite data  This field is filled with the default setting  

The time (in milliseconds) before notification is given indicating the receiver is not 

functioning correctly  This field is filled with the default setting  

ORS may also be configured as an ORION/RAMAR multi-lingual RF reading system  Refer to the ORION Multi-Lingual Radio 

Frequency Reading System (ORI-I-47) installation data sheet for system setup information  

RAMAR Receiver

Choose Cell Track IT, Fast Track IT or Hard Track IT from the drop-down menu, 

depending on the receiver 

Refer to the ORION Multi-Lingual Radio Frequency Reading System (ORI-I-47) 

installation data sheet 

The time (in milliseconds) before notification is given indicating the receiver is not 

receiving transmitter data  This field is filled with the default setting  

No Packets Received Timeout The time (in milliseconds) before notification is given indicating the receiver is not 

functioning correctly  This field is filled with the default setting  

TRACE Receiver

To configure ORS with a TRACE receiver, you must set the COM port  Contact Badger Meter Technical Support for 

configuration information 

Page 45 

ORION® Meter Reading System (ORS)