Badger Meter Inc RANG312 Manual De Usuario
Page 31
1-12
Installation & Operation Manual
Comments
The ORION Field Application software has three different
ways to send information back to the utility office: Reader
Codes, Trouble Codes and Text Messages.
1. From the Read Menu, tap Comments.
Result: The Comments Menu displays with three
options. See Figure 26.
2. Tap to select Reader Codes, Trouble Codes or Text
Messages.
Result: After a code or message is saved on an
Result: After a code or message is saved on an
account, a green check mark as shown in Figure 26
indicates that a code or message has been entered.
The next section provides additional details about
codes and comments.
3. Tap Close to exit and return to the Read Menu.
Figure 26: Comments Menu
Reader Codes
Reader Codes are predefined by the reading data
management software operator. The codes describe
non-emergency information about an account.
You may attach up to three Reader Codes to an account.
1. Tap Reader Codes on the Comments Menu.
Result: The Reader Codes screen displays with the
customer name and address shown.
2. Tap 1, 2 or 3 to enter the 1st, 2nd and/or 3rd code,
respectively.
Result: A list of available codes display. This list is
Result: A list of available codes display. This list is
generated by reading data management software
operator prior to loading a route.
3. Use the arrow keys to move up and down to
highlight the code you want.
4. Tap to select the code you want or use the optional
Search Text function to find a code. There are 99
Reader Codes available.
5. When the desired code is highlighted, tap Select to
accept the code and return to Reader Codes.
6. Repeat steps 2-5 to attach another Reader Code
to the account or tap OK to accept the selected
code(s) and return to the Comments Menu. Tap
Cancel to return to the Comments Menu without
saving a code.
7. Tap Close on the Comments Menu to return to the
Read Menu. Tap Close on the Read Menu to return
to the account Read screen.
Figure 27: Reader Codes
Figure 28: Select Reader Code