Badger Meter Inc RANG312 Manual De Usuario
Page 51
1-12
Installation & Operation Manual
Settings
The third option on the Utilities Menu is Settings. Tap
Settings to display the Settings Menu for the handheld.
Note: Although the meter reader can change these
settings, the next time the unit is loaded with a new
route from the reading data management software, it
will return to the default settings. If the settings need
to be changed permanently, consult the reading data
management operator.
The Settings Menu has five sections: Hardware, Program
Options, High/Low Options, Displayable Field Settings
and Customizations. These five sections allow the meter
reader to view the parameters at which the unit operates or
how it treats certain situations.
Figure 65: Settings Menu
Hardware
The Hardware Settings screen displays the communication
(COM) ports for the hardware attached to the handheld.
The COM ports will be set during training to establish
communication between the software and the handheld.
COM port settings should be only be changed under the
direction of Badger Meter Technical Support. If the COM ports
must be adjusted, follow these steps.
1. Tap Hardware on the Settings Menu to display the
Hardware Settings screen.
2. Tap the hardware name to display the selection
screen.
Figure 66: COM Port Settings
3. Use the up and down arrows to select the setting. Then tap Select.
4. Tap Save to save the change or tap Cancel to return to the Settings Menu without saving any changes.
4. Tap Save to save the change or tap Cancel to return to the Settings Menu without saving any changes.
Note: When using a VersaProbe with a wireless connection to the handheld, tap to check the box next to "Versa Probe is
Bluetooth."