Compal Electronics Inc TP00063AFX Manual De Usuario
Error messages
Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Tablet Setup.
Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Tablet Setup
to check Security settings, and restart the system. If you still have a problem, have the tablet serviced.
to check Security settings, and restart the system. If you still have a problem, have the tablet serviced.
Message: 0187: EAIA data access error
Solution: The access to EEPROM is failed. Have the tablet serviced.
Message: 0188: Invalid RFID Serialization Information Area.
Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced,
and the box serial number needs to be reinstalled. Have the tablet serviced.
and the box serial number needs to be reinstalled. Have the tablet serviced.
Message: 0189: Invalid RFID configuration information area
Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced,
and the UUID needs to be reinstalled. Have the tablet serviced.
and the UUID needs to be reinstalled. Have the tablet serviced.
Message: 0190: Critical low-battery error
Solution: The tablet turned off, because the battery is low. Connect the ac power adapter to the tablet
and charge the battery.
and charge the battery.
Message: 0199: System Security - Security password retry count exceeded.
Solution: This message is displayed if you enter a wrong supervisor password more than three times.
Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Tablet Setup.
Confirm the supervisor password and try again. To clear the error, enter the ThinkPad Tablet Setup.
Message: 2200: Machine Type and Serial Number are invalid.
Solution: Machine Type and Serial Number are invalid. Have the tablet serviced.
Message: 2201: Machine UUID is invalid.
Solution: Machine UUID is invalid. Have the tablet serviced.
Message: 2300: Built-in Battery is broken.
Solution: Replace the built-in battery.
Message: 2302: Built-in Battery is not detected.
Solution: Attach or replace the built-in battery.
Errors without messages
• Problem: My screen keeps blanking when I do not want it to.
Solution: You can disable any system timers, such as the LCD turn-off timer or the blank timer by
doing the following:
doing the following:
1. Go the desktop and tap the battery-status icon in the Windows notification area.
45