Compal Electronics Inc TP00064BUC Manual De Usuario
The NFC device has been tested and found to comply with the limits for the Class B digital device regarding
FCC Part 15 Subpart B. Refer to “Electronic emissions notices” on page 5 . Also the device underwent the
certification process for the Part 15 Subpart C under the FCC ID: MCLT77H519.
FCC Part 15 Subpart B. Refer to “Electronic emissions notices” on page 5 . Also the device underwent the
certification process for the Part 15 Subpart C under the FCC ID: MCLT77H519.
FCC RF exposure compliance
The radiated output power of your tablet is below the FCC radio frequency exposure limits. Nevertheless,
it should be used in such a manner that the potential for human contact is minimized during normal
operation of your tablet.
it should be used in such a manner that the potential for human contact is minimized during normal
operation of your tablet.
CAUTION:
The radiated energy from the antennas conforms to the FCC limit of the SAR (Specific Absorption
Rate) requirement regarding 47 CFR Part 2 Section 1093, when the tablet operates in the conventional
setting. The SAR is determined to measure at the highest power level in each frequency band.
However, the actual SAR level of ThindPad 10 in the operation bands is well below the maximum
value in some measurement plots. Because ThindPad 10 adjusts the cellular transmission power
automatically based upon the proximity to the human body and orientation. Namely, the closer
distance to you from ThindPad 10 will lower the cellular transmission power level. ThindPad 10 has
been tested and found to meet the FCC RF exposure guidelines.
The radiated energy from the antennas conforms to the FCC limit of the SAR (Specific Absorption
Rate) requirement regarding 47 CFR Part 2 Section 1093, when the tablet operates in the conventional
setting. The SAR is determined to measure at the highest power level in each frequency band.
However, the actual SAR level of ThindPad 10 in the operation bands is well below the maximum
value in some measurement plots. Because ThindPad 10 adjusts the cellular transmission power
automatically based upon the proximity to the human body and orientation. Namely, the closer
distance to you from ThindPad 10 will lower the cellular transmission power level. ThindPad 10 has
been tested and found to meet the FCC RF exposure guidelines.
To know the location of transmission antennas for the Wireless LAN/Bluetooth combo card and the wireless
WAN card, see “Locating the UltraConnect
WAN card, see “Locating the UltraConnect
™
wireless antennas” in the User Guide.
Emergency Calls
The wireless WAN card does not support voice calls, hence their use for essential communication is not
possible, including emergency calls regarding the E911 rule.
possible, including emergency calls regarding the E911 rule.
Simultaneous use of RF transmitters
Your tablet is approved for simultaneous use of the integrated wireless LAN/Bluetooth combo card and
wireless WAN card.
wireless WAN card.
Make sure of the following conditions when you use any other external wireless option device:
• When you use any other RF option device, you are requested to confirm that the device conforms to the
RF Safety requirement and is approved to use for your tablet.
• You must follow the RF Safety instructions of wireless option devices that are included in the user manual
of the RF option device.
• If wireless options are prohibited to use in conjunction with another transmitters, you must turn off all
other wireless features in your tablet.
Radio Frequency interference requirements
Each device has been tested and found to comply with the limits for a Class B digital device pursuant to
FCC Part 15 Subpart B. Refer to “Electronic emissions notices” on page 5 .
FCC Part 15 Subpart B. Refer to “Electronic emissions notices” on page 5 .
When you use a wireless LAN/Bluetooth combo card in the 802.11 a/n transmission mode:
• Each device is restricted to indoor use due to its operation in the 5150 to 5250 MHz frequency range.
FCC requires these products to be used indoors for the frequency range 5150 to 5250 MHz to reduce the
potential for harmful interference to co-channel Mobile Satellite systems.
potential for harmful interference to co-channel Mobile Satellite systems.
• High power radars are allocated as primary users of the 5250 to 5350 MHz and 5650 to 5850 MHz bands.
These radar stations can cause interference with and/or damage this device.
2