Compal Electronics Inc WM3BBG50 Manual De Usuario
Cancel is selected.
The next time you boot up the Notebook, the BIOS will
attempt to load the values you saved in Non-Volatile
memory. If these values cause the system boot to fail,
reboot and press [F2] to enter the Setup program. Once in
Setup, you can try to change the values that caused the
system boot to fail. If the problem persists, load the default
values (see Get Default Values below).
The next time you boot up the Notebook, the BIOS will
attempt to load the values you saved in Non-Volatile
memory. If these values cause the system boot to fail,
reboot and press [F2] to enter the Setup program. Once in
Setup, you can try to change the values that caused the
system boot to fail. If the problem persists, load the default
values (see Get Default Values below).
If you attempt to exit the Setup program without saving your
changes, the program will prompt you with a message asking if
you want to save your changes before exiting.
changes, the program will prompt you with a message asking if
you want to save your changes before exiting.
Exit Discarding Changes
This option can be used if you do not want to save the
changes you have made to the Setup program. The default
is set to No. If you have made changes to the fields other
than system date, system time and password, the system
will ask for confirmation when choosing Exit Discarding
Changes
.
The system reboots using the original Setup values.
Load Setup Default
This option allows you to load the default values for each of
the parameters on the Setup Menus. When this option is