Psion Inc 7505BTHC25 Manual De Usuario
138
iKôn Rugged PDA (Windows Mobile 6) User Manual
Chapter 5: Settings
Decoded (Internal) Scanners
Code 128
Decoded (Internal) Scanners
Code 128
5.28.1.7 Code 128
Enabled
Set this parameter to on to enable “Code 128”.
Set this parameter to on to enable “Code 128”.
Enable GS1-128/GS1 US
Previously UPC/EAN and UCC, these types of bar codes include group separators and start
codes.
Previously UPC/EAN and UCC, these types of bar codes include group separators and start
codes.
Enable ISBT 128
To successfully scan this variation, “Enable ISBT 128” must be set to on.
To successfully scan this variation, “Enable ISBT 128” must be set to on.
Decode Performance
If this parameter is set to on, one of three decode levels assigned to the “Decode Perfor-
mance Level” parameter can be selected.
If this parameter is set to on, one of three decode levels assigned to the “Decode Perfor-
mance Level” parameter can be selected.
Decode Perf. Level
This parameter provides three levels of decode performance or “aggressiveness” for Code
128 symbols. Increasing the performance level reduces the amount of required bar code ori-
entation – this is useful when scanning very long and/or truncated bar codes. Keep in mind
that increased levels reduce decode security.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
This parameter provides three levels of decode performance or “aggressiveness” for Code
128 symbols. Increasing the performance level reduces the amount of required bar code ori-
entation – this is useful when scanning very long and/or truncated bar codes. Keep in mind
that increased levels reduce decode security.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
Field Size/Char
Refer to page 137 for details.
Refer to page 137 for details.
5.28.1.8 EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Set this parameter to on to enable “EAN 13”.
5.28.1.9 Prefix/Suffix
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press the key
you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key
value of the keypress is displayed.
This character, if non-zero, is added before a successfully decoded bar code. Press the key
you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key
value of the keypress is displayed.