Psion Inc 7505BTMW Manual De Usuario

Descargar
Página de 135
Chapter 6: Peripheral Devices & Accessories
Wiring Vehicle Power To The Cradle
240
Ikôn Rugged PDA (Windows CE 5.0) User Manual
6.10.3.1 Wiring Vehicle Power To The Cradle
The Powered Vehicle Cradle uses the automotive power outlet or the vehicle fuse box to 
power from the vehicle battery system. The CLA power cable (PN 1081141) is used for the 
automotive power outlet; the Power Extension cable (PN 1081142) is used for the vehicle 
fuse box.
Figure 6.14 CLA Power Cable
Power cables are equipped with fuses and instructions are supplied with each cable. Use 
only a 4A slow blow Safety-approved fuse in the fuse assembly.
These cables should only supply operating power from the vehicle to the Powered Vehicle 
Cradle from 12VDC or 24VDC systems. 
The Powered Vehicle Cradle draws no more than 1.9A @ 12VDC or 0.95A @ 24VDC. 
Any additional wiring, connectors or disconnects used should be rated for at least 4A. 
The Powered Vehicle Cradle and peripherals can be used with both negative ground 
systems when using the Power Extension cable. Peripheral wiring should be closely 
examined to avoid ground loops in positive ground systems.
There is the option of connecting power to the cradle before or after the ‘key’ switch.
Warning: Applying a voltage above 36VDC or reversing polarity may result in perma-
nent damage to the vehicle cradle power section and will void the product 
warranty. For safety reasons, disconnect the vehicle cradle power cable 
when the vehicle battery is being charged by an source other than the 
vehicle alternator.
DC Power Plug
Automotive Power
Adaptor Plug