Ortek Technology Inc MS9000E Manual De Usuario
Wireless Office Keyboard And Mouse
16
C. The bottom of the receiver and keyboard both has an ID setting
button. Press the ID button on the receiver first; then the receiver’s
Bat. Low LED will glitter (about 0.5 second glitter one time). Then
press the ID button under the keyboard. The receiver’s Bat. Low
LED will stop glitter; it means the keyboard’s setting up is
completed.
Bat. Low LED will glitter (about 0.5 second glitter one time). Then
press the ID button under the keyboard. The receiver’s Bat. Low
LED will stop glitter; it means the keyboard’s setting up is
completed.
NOTE: When you replace the batteries, remember to
reset again!
D. This type of wireless keyboard and mouse can work in two radio
frequency channels. You may need to switch channel, for example,
if the signal from your keyboard is conflicting with that from other
users close by. To change channel, please refer to Step B.
if the signal from your keyboard is conflicting with that from other
users close by. To change channel, please refer to Step B.
Setting Program:
This section describes how to use the Wireless Office Keyboard setting
program. Once the software installation for the Power Office Keyboard is
program. Once the software installation for the Power Office Keyboard is
Battery Chamber
Keyboard ID Setting Button
Keyboard Channel Switch