GEMMY INDUSTRIES LIMITED BVI 1002015 Manual De Usuario

3

4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product)

5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug.

1. Remove the remote from its packing box. 

2.  Remove the battery compartment cover. (Fig.1) Install the included 23A battery. 

    Ensure the battery is installed correctly with regard to polarity (+ and -).

3. The remote has two buttons (Fig 2).

a.  ON/OFF – Press to turn the set ON; press again to turn the set OFF.

b.  FUNCTION: Light Colors: Change the light color to any on this list by pressing the button on remote until you reach the 

desired color.

1.  When using the remote to turn ON your set, there may be up to a 2 seconds delay before the light pattern starts working.

2.  To change light patterns it is recommended to wait 2 seconds each time after pressing the Function button until you reach 

the desired pattern.

3.  If for any reason the signal from the remote (transmitter) to the control box (receiver) hangs up, please turn off and then 

restart the power to the set.

4.  If a power interruption, the system’s memory keeps the last light pattern displayed.

5.  The effective operating distance of the remote is 20’ (6m). 

This product was designed for indoor and outdoor use. 

Do not shake the device. Avoid brute force when operating the device.

Keep away from direct insulation (particularly in cars) and heaters.

Do not permit operation by persons not qualified to operating the device. Most damages are the result of

unprofessional operation!

Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.

Please use the original packaging if the device is to be transported.

Unauthorized modifications on the device are unacceptable due to safety reasons!

If this device is operated in any way different from the ways described in this manual, the product may suffer

damages and the guarantee becomes void.

- Insert the plug into socket.

- Set this device as a projector.

- Extract the plug if not in use. Be careful with the power cord! 

Fig. 1

Fig. 2

1. LightShow 

2. White

3. Red 

4. Green 

5. Blue 

6. Red and Green 

7.  Red and Blue 

8.   Blue and Green

9.   Red,Green and Blue

10. White and Red 

11. White and Green 

12. White and Blue

13. Red,White and Blue.

ON/OFF

EFFECT