Visonic Inc. MDT122S Manual De Usuario
DE2291U
first
MDT-122 S
MDT-122 S
MDT-122 S
MDT-122 S
RF / IR Man-Down Transmitter
User’s Guide
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
The MDT-122 S is an automatic personal security transmitter.
This micro-processor controlled transmitter is designed for use by
guards in a prison, by security officers in an organization or
institution, or by employees in a large industrial complex (as an
industrial safety device). The unit is a part of the SpiderAlert
This micro-processor controlled transmitter is designed for use by
guards in a prison, by security officers in an organization or
institution, or by employees in a large industrial complex (as an
industrial safety device). The unit is a part of the SpiderAlert
network. The transmitter is activated in the following events:
1. PANIC
1. PANIC
When the guard needs help, he presses both buttons
(pushing both buttons is required to prevent an accidental
panic message transmission).
(pushing both buttons is required to prevent an accidental
panic message transmission).
2. MANDOWN
When the guard falls down (automatic transmission when the
unit is tilted by more than 60
unit is tilted by more than 60
°
).
3. PULL-CORD
The MDT-122 S automatically transmits a pull-cord alarm:
A.
When the unit is forcibly pulled from the holder and the
pull cord is detached from the holder’s belt
pull cord is detached from the holder’s belt
B.
When the unit is intentionally pulled by the holder
(emergency event) and the pull cord is detached from
his belt.
(emergency event) and the pull cord is detached from
his belt.
4. TAMPER
When the transmitter is opened by an unauthorized person.
5. LEFT OR RIGHT BUTTON
When the guard presses the left or right push-button, an
attendance message is sent to the security main station
(confirming that he is not attacked) and the unit is also tested
(the LED is lit).
attendance message is sent to the security main station
(confirming that he is not attacked) and the unit is also tested
(the LED is lit).
When activated, the transmitter delivers an identifiable alert
message (one of various messages, according to the events
predetermined priority) to the main security station.
message (one of various messages, according to the events
predetermined priority) to the main security station.
Figure 1 - External View
Figure 2 - Activating the
Internal Tilt Switch
When the transmitter is activated, the holder’s name and exact
location are displayed on main security station screen (according
to the SpiderAlert
location are displayed on main security station screen (according
to the SpiderAlert
network programming) and a siren and/or
audible alarm are activated, to provide the necessary help (see
figure 3).
figure 3).
The transmitter is attached to the user’s belt with a clip like a
pager, or inside a pouch / holster and connected with a pull cord
to the guard’s belt.
pager, or inside a pouch / holster and connected with a pull cord
to the guard’s belt.
The transmitter is not activated during the guard’s regular daily
activities (running, jumping, sitting, bending, removing cloths,
going to bathroom and going off and on duty).
activities (running, jumping, sitting, bending, removing cloths,
going to bathroom and going off and on duty).
4. USING THE MDT-122 S
4. USING THE MDT-122 S
4. USING THE MDT-122 S
4. USING THE MDT-122 S
4.1 Initial Functions
When the MDT-122 S leaves the factory, the internal battery
contact (+) is covered by an isolation foil. To make the unit
operational, perform the following actions:
contact (+) is covered by an isolation foil. To make the unit
operational, perform the following actions:
1st. Press the belt clip, by your hand, to gain access to the MDT-
122 S cover’s screw (see figure 1).
2nd. Remove the cover Philips screw.
3rd. Press (with your finger) at the center of the top side (on the
TEMP TILT OFF inscription) and carefully open the front cover.
Caution: When opening the MDT-122 S, the IR LEDs
should not be touched, to prevent their movement. If the IR
LEDs are moved, the IR beams may not be directed towards
the IR window and as a result the IR transmission range
might be reduced.
should not be touched, to prevent their movement. If the IR
LEDs are moved, the IR beams may not be directed towards
the IR window and as a result the IR transmission range
might be reduced.
Vertical (normal)
Position
60
°
tilt
60
°
tilt
Left
pushbutton
Temporary
TILT OFF
push-button
Tilt ON/OFF
slide switch
Belt clip
Pull
cord
Cover’s screw
(between belt
clip’s jaws)
Right
pushbutton
LED
IR window
SpiderAlert main station
SpiderBus
MDT-122 S
in alarm
(transmission)
position
SR-520
RF+IR receiver
Attacked holder’s
name and location
are displayed on
the screen
SpiderAlert
network
controller
I/O unit
with Siren /
loudspeaker
❇
John Markus
is attacked!
is attacked!
Paging
transmitter
Guards with pagers
Figure 3 - MDT-122 S Integration in the SpiderAlert Network