Shenzhen Yitoa Intelligent Control Co. Ltd. 300082 Manual De Usuario
12
www.dimplex.com
Operation
To access the controls, flip open
the control panel cover towards
the bottom of the fireplace.
(Figure 5)
A. On/Off Switch
The on/off switch supplies power
A. On/Off Switch
The on/off switch supplies power
to all fireplace functions (Heater/
Flame).
B. Flame Action Control
Turn the Flame Action Control
Turn the Flame Action Control
knob to adjust the flame speed to
the desired level.
C. Interior Light Control
Turn the Interior Light Control
Turn the Interior Light Control
knob to increase or decrease the
brightness of the upper lights.
D. Thermostat Control
To adjust the temperature to
your individual requirements,
turn the thermostat control
clockwise all the way to turn
on the heater. When the room
Figure 5
reaches the desired temperature,
turn the thermostat knob counter
clockwise until you hear a click.
Leave thermostat in this position
to maintain the room temperature
at this setting. For additional
heat, turn clockwise until you hear
the click again and the heater will
turn on.
E. LED Indicators
Indicates the current function of
E. LED Indicators
Indicates the current function of
the fireplace.
!
NOTE: When the firebox is
changing from Low heat to High
heat the speed of the fan does
not change just the amount of
heat being emitted.
F. 3-Position Switch
F. 3-Position Switch
Pressing the switch up "I" toggles
sequentially through the three
levels of the fireplace.
Level 1: The flame effect
Level 1: The flame effect
is turned on and the first
red indicator light flashes
A
B
F
E
D
C