Climax Technology Co Ltd CTC1052RV Manual De Usuario
19
9
Another device has been learnt-
in before.
in before.
<
<
N
N
O
O
T
T
E
E
>
>
)
When CTC-1052RV received the alarm
signal from the Silent Pendant, it will
not emit any warning beeps during
Reporting and Guard time period.
not emit any warning beeps during
Reporting and Guard time period.
Command 94
Learn-In Device
<
<
N
N
O
O
T
T
E
E
>
>
)
This command is not available in
Remote Programming Mode.
z
Up to 7 devices can be learnt into CTC-
1052RV by using Command #94.
1052RV by using Command #94.
z
The available devices that can be learnt-in
Command #94 are:
Command #94 are:
9
PIR Sensor ----- PIR
9
Smoke Detector ---- SD
9
Carbon Monoxide ---- CO
9
Fixed Panic Button ---- PB
9
Wrist Transmitter ---- WTR
9
Pendant Transmitter ---- WTR
9
Water Sensor ---- WS
9
Fall Sensor
Step 1: Enter 94 + # on the phone set, then
a short beep will be heard via the
phone set.
phone set.
Step 2:
Press the learn button on the
device within 20 secs.
device within 20 secs.
)
Learning can only be completed
within the signal reception range of
CTC-1052RV.
within the signal reception range of
CTC-1052RV.
)
If no signal is received within 20
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
sec, CTC-1052RV will emit a long
beep and automatically returns to
Programming mode.
Step 3: CTC-1052RV will emit 2 beeps to
indicate the device is learnt-in
successfully.
successfully.
)
Adding a Pendant for a second
time is prohibited unless it is
removed from the system first.
time is prohibited unless it is
removed from the system first.
)
If one long beep is emitted
instead of 2 beeps, it indicates:
instead of 2 beeps, it indicates:
9
The device has already been
learnt-in.
learnt-in.
9
When an 8
th
device is attempted
to learn-in.
Step 4: Repeat steps 1-3 until all devices
are learnt-in.
<
<
N
N
O
O
T
T
E
E
>
>
)
Adding a device for a second time is
prohibited unless it is removed from
the system first.
the system first.
)
WTRV is not able to learn-in under this
command.
Command 98
Factory Default Reset
z
To Reset CTC-1052RV to factory default
settings, enter (98) and then (#).
settings, enter (98) and then (#).
z
After one short beep, continue by entering
(
(
ÀÀ) and then end with another (#), one
beep will be heard for termination.
z
Once the Factory Default Reset is
executed, all the programmed data is
returned to its default value and all the
devices that have been learnt-in are
removed. You have to do the programming
and learn-in the device one by one again.
executed, all the programmed data is
returned to its default value and all the
devices that have been learnt-in are
removed. You have to do the programming
and learn-in the device one by one again.
Command 99
Exit Programming Mode
z
Enter (99) and (#), after one short beep,
CTC-1052RV exits the Programming Mode
and returns to idle mode.
CTC-1052RV exits the Programming Mode
and returns to idle mode.
3.3. SMS Remote
Programming
Programming
<
<
N
N
O
O
T
T
E
E
>
>
)
Prior to procced, please be reminded to
change the language setting of your
mobile phone to English.
change the language setting of your
mobile phone to English.
Step 1: Use your handset and go into the SMS
edit screen.