Climax Technology Co Ltd CTC1052RV Manual De Usuario

2 

—  A special telephone cord to connect 

CTC-1052RV and your phone unit 
for Local Programming (optional).  

 

 

 

 

z  An AC power adapter is required to 

connect to a wall outlet. Be sure only to 
use an adapter with the appropriate AC 
voltage rating to prevent component 
damage. A DC 12V output and 2A 
switching power is generally used to 
power CTC-1052RV. 

z  In addition to the adapter, there is a 

rechargeable battery inside CTC-1052RV, 
which serves as a back-up in case of a 
power failure. 

z  The battery used is a Ni-Cd 7.2V 1300 

mAH rechargeable battery. 

z 

During normal operation, the AC power 

adapter is used to supply power to CTC-
1052RV and at the same time recharge 
the battery.

 

z 

When the battery is fully charged, it serves 

as a back-up power source for a period of 
at least 14.5 hours. It takes approximately 
48 hours to fully charge the battery.

 

z 

The battery can be manually disconnected 

by the battery switch located at the bottom 
(covered with a rubber cap).

 

z 

Battery Switch is set as ON by factory 

default. If switched to OFF, the battery will 
not be charged when AC power is 
connected, nor will it serve as a back-up 
power source when AC power is missing.

 

 

) 

Please make sure the battery switch is 

slid back to ON position (as marked) 
after manually disconnected the 
rechargable battery.