DTC Communications Inc. PD2TX100C Manual De Usuario

3

NOTE: Describes special issues you should be aware of 
while using a particular function.

WARNING: Calls out situations in which 
equipment could be damaged or a process could be 
incorrectly implemented, but in which operator safety is 
not a factor.

TIP: Describes application hints.

FOR BODY-WORN APPLICATIONS, only the S-Band unit, DTC Part# 
PD2-TX-100-S, has been FCC-approved (FCC ID H25PD2TX100S), 

only when used in conjunction with DTC’s Palladium Digital VidiVest DTC 
Part# Pd-VidiVest-S(-RC), or Digital Video Jacket DTC Part# Pd-VIDI-DJ-
S(-RC). 
FOR 

ABOVE, a separation distance of at least 20 cm MUST be maintained 
between the antenna and the body of the user or nearby persons.
When the unit is used consistent with the two previous notices, it 
complies with FCC radiation exposure limits set forth for an uncontrolled 
environment, per FCC Rules & Regulations, sections 1.1307, 2.1091 & 
2.1093, as required by section 90.1217.

NOTE: Unless specifically designed for body-worn ap-
plications, the antenna must be kept at least 20 cm away 
from the body of the user.

NOTE: Do not allow the device to directly contact the 
skin due to warm operating temperatures.

Quick Start   ..................................................................................................................4-5
  Accessories   ........................................................................................................................ 5
Introduction  ...................................................................................................................... 6
Operation 

 ........................................................................................................................ 7

  Using your Palladium II Transmitter ........................................................................... 7
  Changing your Transmitter Configuration ............................................................... 7
Components 8-9
Programming  .......................................................................................................... 10-17
  System PC Controller Application Software .........................................................10
  Transmitter Control Application .................................................................................11
Specifications ......................................................................................................... 18-19
Notes