DTC Communications Inc. T99FG Manual De Usuario
H25T99FG
T99FG Operating Instructions
page 3
©1999 DTC Communications, Inc.
All body-worn transmitters are susceptible to “clothing noise”. The holder that comes
with the T99FG tends to keep the microphone away from the body, reducing this
tendency.
with the T99FG tends to keep the microphone away from the body, reducing this
tendency.
Flex™ Pager Features
The Flex™ pager has several features that are fully functional and assist in the pager
disguise.
disguise.
One useful feature is the clock display of the pager. Feel free to set the time and date on
the display. But, if you do not, the clock will act as a timer indicating the time since turn
on. This may help in assessing battery life remaining.
the display. But, if you do not, the clock will act as a timer indicating the time since turn
on. This may help in assessing battery life remaining.
You may use the built in alarm clock feature of the pager. As you navigate through the
function menu you will find a “Set Alarm” function. This can be used to simulate a page
being received at a certain time. When the alarm is set, a “bell” symbol is visible in the
lower left corner of the screen.
function menu you will find a “Set Alarm” function. This can be used to simulate a page
being received at a certain time. When the alarm is set, a “bell” symbol is visible in the
lower left corner of the screen.
The beeper and vibrator are both still active in the unit. By paging through the menus,
you can set the alert type for the pager, and cause the beeper and vibrator to activate.
This may be useful to show that the pager is “real”.
you can set the alert type for the pager, and cause the beeper and vibrator to activate.
This may be useful to show that the pager is “real”.
Remember that the “Turn Pager Off/On” function will have NO EFFECT on the
transmitter.
transmitter.
Operation
1. Place the holder on a belt and load a Lithium AA battery into the pager. The pager
will power-up and beep, showing the date, time and the word Airtouch™ in the
display. After about 10 seconds the display will blank and only show the “power-on”
symbol and the speaker symbol.
display. After about 10 seconds the display will blank and only show the “power-on”
symbol and the speaker symbol.
2. Pressing any button will re-activate the display. You may access the menus per the
Flex™ instructions, if you wish. NONE OF THE BUTTONS OR RELATED
FUNCTIONS WILL HAVE ANY EFFECT ON THE TRANSMITTER
WHATSOEVER.
FUNCTIONS WILL HAVE ANY EFFECT ON THE TRANSMITTER
WHATSOEVER.
3. Slide the unit into the belt holder.
4. Remove the battery when not in use. The unit will transmit when an operating battery
is in place; there is no on/off switch. IT IS IMPERATIVE TO DISCARD partially
used batteries, as their remaining life is not very predictable. ALWAYS start an
operation with a fresh battery.
used batteries, as their remaining life is not very predictable. ALWAYS start an
operation with a fresh battery.