Casablanca Fan Company CASA4T Manual De Usuario

CASABLANCA FAN COMPANY ADAPT•TOUCH™ CONTROL LIMITED WARRANTY

The Casablanca Fan Company makes the following limited warranty to the original purchaser of the ADAPT•TOUCH™ Control (“Control”): Your Control is
warranted to be free from defects in material and workmanship for a period of one year from the date of sale. If the Control malfunctions or fails within the
warranty period due to a defect in material or workmanship we will replace it free of charge. IF THE ORIGINAL PURCHASER CEASES TO OWN THE CONTROL,
THIS WARRANTY AND ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE, ARE VOIDED. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF ANY IMPLIED WARRANTY, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN RESPECT TO ANY CONTROL, IS EXPRESSLY
LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE FOR SUCH CONTROL. This warranty excludes malfunctions or failures, which were
caused by repairs by persons not authorized by us, mishandling, improper installation, modifications, or damage to the Control while in your possession,
or unreasonable use. This warranty does not apply to batteries or to deterioration or damage to the product caused by the use of faulty batteries. To obtain
a replacement, return your Control postage prepaid along with proof of purchase to Casablanca Fan Company Service Department 761 Corporate Center
Drive, Pomona, California 91768. IN NO EVENT SHALL CASABLANCA FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.

OPERATION OF CONTROL

Step 20. Turn On wall switch, the light will turn On at
maximum brightness.

LIGHT OPERATION:

• Press and quickly release either of the 2 light buttons on

the hand held remote to turn the light OFF or ON.
Pressing the RIGHT button will turn the light On at full
brightness. Pressing the LEFT button will turn the light
On at low brightness.

• Press and hold the RIGHT light button for more than 1

second to turn the light ON and decrease from full
brightness to OFF.

• Press and hold the LEFT light button for more than 1

second to turn the light ON and increase from low
brightness to OFF.

• Release the light button when the desired light level is

reached.

• Continue to hold the light button to repeat the cycle.
• While the light is ON, holding the RIGHT light button

will decrease the light brightness and holding the LEFT
light button will increase the light brightness.

• Turning the light OFF with either key resets the dimming

function.

FAN OPERATION:

• Press the High, Medium, or Low speed buttons to turn

the ceiling fan ON at the desired speed.

• Press the fan OFF key to turn the ceiling fan OFF. For best

fan operation: Allow the ceiling fan motor to start on
High, then select the desired speed.

• You can change to any speed at any time by pressing the

appropriate fan speed button.

MANUAL LIGHT SWITCH OPERATION:
To turn the lights ON without the transmitter, turn OFF the
wall switch for 5 seconds, then turn the wall switch back ON.
The light will turn ON at maximum brightness, and the fan will
be OFF. For everyday operation, leave the wall switch ON.
However, if the control will not be used for an extended
period of time (several days), turn the wall switch OFF.

ADAPT•TOUCH™ TROUBLESHOOTING

SYMPTOM
1. No functions operate

2. Operates only at close range.

3. Inconsistent operation.

POSSIBLE CAUSE
a. Main power not restored.

b. Fan pull chain not set to High.

c. Light pull chain not set ON.
d. Receiver wiring incorrect.
e. Transmitter and receiver dip

switches do not match.

f. Battery too weak.

a. Battery too weak.

a. RF interference.
b. Continuing RF Interference

SOLUTION
a. Replace fuse. Turn ON circuit

breaker. Turn ON wall switch.

b. Turn OFF power at wall switch or

main electric panel. Set fan to
High speed.

c. Set light kit to ON.
d. Verify wiring connections.
e. Set transmitter and receiver to

same dip switch settings.

f. Replace with new alkaline battery.

a. Replace with new alkaline battery.

a. Turn OFF wall switch for 5

seconds, then turn back ON.

b. Change dip switch settings to a

different code in both Transmitter
and Receiver.