LITE-ON Technology Corp. EV700 Manual De Usuario
12
Using Your EV Series Monitor
Troubleshooting
If you have problems with your monitor, this troubleshooting section may
help you identify and fix them.
help you identify and fix them.
No picture
■
Make sure the power cord is properly connected to both the back of the
monitor and the wall outlet.
monitor and the wall outlet.
■
Make sure the video cable is securely connected to the back of the
monitor and to the back of the computer.
monitor and to the back of the computer.
■
Make sure the monitor power button is on.
■
If the power saving indicator is orange or blinking orange:
■
Make sure that the computer is on.
■
Move the mouse or press any key on the keyboard to bring the
monitor out of sleep mode.
monitor out of sleep mode.
■
Check the video connector and the end of the video cable for any
pins that might be bent or pushed in.
pins that might be bent or pushed in.
■
Make sure that the video cable is not damaged.
■
Restart the computer with the monitor turned on.
■
Perform a monitor self-test by turning off your monitor and unplugging
the video cable from the back of the monitor. Turn the monitor back on
and wait for ten seconds. If the monitor is functioning properly, a
self-diagnostic screen appears.
the video cable from the back of the monitor. Turn the monitor back on
and wait for ten seconds. If the monitor is functioning properly, a
self-diagnostic screen appears.
Important
Make sure that the monitor has warmed up for
approximately 30 minutes before making any judgments
about the picture quality.
approximately 30 minutes before making any judgments
about the picture quality.