Seiko Epson Corporation AP002 Manual De Usuario
126
Chapter 11
Maintenance
11-1 Performing maintenance
Performing after care
Do not leave any water, sweat, or dirt on the device.
After using the device, use low pressure water from a faucet to wash the contact
points, wipe away most of the water with a towel and so on, and then let it dry
naturally.
Water, sweat, or dirt could cause the device to malfunction.
points, wipe away most of the water with a towel and so on, and then let it dry
naturally.
Water, sweat, or dirt could cause the device to malfunction.
Contact points
If the device is placed in the cradle when it is covered in water, sweat, or dirt, the
contact points could corrode and cause a malfunction.
If charging or communicating becomes unstable, clean the contact points on
the device and the cradle with a damp cotton swab.
contact points could corrode and cause a malfunction.
If charging or communicating becomes unstable, clean the contact points on
the device and the cradle with a damp cotton swab.
Do not clean using organic solvents such as benzene, thinner, alcohol, or detergent.
This could cause the product to degrade.
This could cause the product to degrade.
About the strap
If the strap gets soiled, wash it with water and wipe thoroughly with a dry cloth.
This strap is made from polyurethane and after years of use the color may fade
or it may lose its elasticity.
This strap is made from polyurethane and after years of use the color may fade
or it may lose its elasticity.
HR sensor maintenance
• After exercise, take off the HR sensor and HR belt, dip them in water and wash.
• Also make sure that you wash the button sections and wipe off all moisture.
• Although you can wash the HR belt in a washing machine, make sure you place
• Also make sure that you wash the button sections and wipe off all moisture.
• Although you can wash the HR belt in a washing machine, make sure you place
the belt in a net, and do not use a drier.
• Do not iron, dry clean, or use a chlorine-based detergent on the HR belt.
• Wash the HR sensor carefully with water. Do not use a washing machine or a drier.
• Dry the HR sensor and HR belt completely and store them separately.
• Wash the HR sensor carefully with water. Do not use a washing machine or a drier.
• Dry the HR sensor and HR belt completely and store them separately.
Use low pressure water
to wash the device.
to wash the device.