Seiko Epson Corporation AP002 Manual De Usuario
68
Chapter 7
Measuring Heart Rate (SS-700/SS-500 Only)
4
Use / to highlight [ON], and then press .
After confirming the selection, the [Settings] screen is displayed.
When [HR Sensor] is set to [ON], is displayed on the chronograph, exercise,
and interval measurement screen.
and interval measurement screen.
5
Hold down for at least two seconds to return to the
[Menu] screen.
When the HR sensor is set to [ON], the battery life for the device is reduced ( P. 16).
When you are not using the HR sensor, set [HR Sensor] to [Off ].
When you are not using the HR sensor, set [HR Sensor] to [Off ].
To turn this function off, select [OFF] in step
4
.
When the [HR Sensor] is set to [ON], you can measure your heart rate while using the
chronograph, exercise, or interval functions.
You can check the status of the HR sensor from the measurement icon on the screen.
chronograph, exercise, or interval functions.
You can check the status of the HR sensor from the measurement icon on the screen.
Measurement screen: Chronograph
On
: Communicating with the HR sensor.
Flashing : Cannot communicate with the HR sensor.