Seiko Epson Corporation AP003 Manual De Usuario
Problem
Solution
Charging
The device does not charge even
when it is placed in the cradle.
when it is placed in the cradle.
Charging stops frequently.
Check the connection for the cradle.
Clean the contact points on the device and the cradle.
U
“Performing After Care” on page 112
A malfunction may have occurred if you cannot charge the
device even after checking the points above. Stop
charging the device, and contact our information center.
device even after checking the points above. Stop
charging the device, and contact our information center.
The charge error screen is
displayed.
displayed.
Charge in an environment where the surrounding
temperature is 5 to 35˚C.
temperature is 5 to 35˚C.
The device and the cradle become
hot while charging.
hot while charging.
There may be a malfunction. Stop using the device, and
contact our information center.
contact our information center.
Waterproofing function
Can I use the device when
swimming?
swimming?
This device is water resistant at 5 barometric pressures and
can be used when swimming. Do not perform button
operations in the water. GPS signals cannot be received
when in water. Also, do not swim while wearing the
optional HR monitor as it is not waterproof.
can be used when swimming. Do not perform button
operations in the water. GPS signals cannot be received
when in water. Also, do not swim while wearing the
optional HR monitor as it is not waterproof.
Inside the glass becomes cloudy.
Condensation may occur in the device due to differences in
temperature between the device and the open air.
Temporary condensation does not have any effect on the
device. You can continue to use the device in this
condition. If the condensation remains for a long time,
water may have got inside the device.
temperature between the device and the open air.
Temporary condensation does not have any effect on the
device. You can continue to use the device in this
condition. If the condensation remains for a long time,
water may have got inside the device.
Contact our information center.
Accessories
Acquiring optional products.
The AC adapter and HR monitor are available as optional
extras. Contact your local dealer for more information.
extras. Contact your local dealer for more information.
Also, if you need an extra cradle, contact your local dealer
or our information center.
or our information center.
HR Monitor
The HR monitor is not working
correctly.
correctly.
Check the following items.
❏ Are you wearing the HR belt correctly?
U
“Wearing the HR Monitor” on page 67
❏ Has it been registered to the device?
U
“Registering the HR Monitor to the Device” on
page 68
❏ Is the HR monitor set to ON.
U
“Enabling the HR Monitor” on page 70
❏ If you cannot register to the device, replace the
battery after resetting the HR monitor. To reset the HR
monitor, turn the battery over so that the negative
side is facing up and replace it for three seconds.
monitor, turn the battery over so that the negative
side is facing up and replace it for three seconds.
❏ Has the battery run out? Replace the battery if it has
run out.
U
“Replacing the Battery for the HR Monitor” on
page 74
❏ Perform a system reset for the device.
U
“Resetting the System” on page 121
SF-710/510/310 User's Guide
Troubleshooting
119