Seiko Epson Corporation AP003 Manual De Usuario
F
Set today's date.
Use C/D to select, and then press A.
G
Set the Date Format.
Use C/D to select, and then press A.
H
Go to a location outside with no obstructions
overhead.
overhead.
c
Important:
Next time, a signal is received from the GPS
and time is automatically synchronized.
Since the signal from the GPS cannot be
received inside, go outside to a location
without any obstructions overhead.
Next time, a signal is received from the GPS
and time is automatically synchronized.
Since the signal from the GPS cannot be
received inside, go outside to a location
without any obstructions overhead.
I
This completes the settings.
Use C/D to highlight Yes, and then press A.
A signal is received from the GPS and time is
automatically synchronized.
automatically synchronized.
When Complete is displayed, press A.
The time screen is displayed.
Note:
❏ When you are resting, the device enters sleep status
and the time is displayed. This does not indicate a
problem as the display is restored the next time you
move.
problem as the display is restored the next time you
move.
❏ If time synchronization fails, the signal from the GPS
may be being obstructed. Perform Time Adjust from
Sys. Settings
Sys. Settings
.
U
“Sys. Settings” on page 95
SF-710/510/310 User's Guide
Preparing and Basic Operations
27