Seiko Epson Corporation AP006 Manual De Usuario
GPS Positioning
When you change to the measurement screen, the
device receives a signal from various satellites, and
identifies a GPS to use for measurement.
device receives a signal from various satellites, and
identifies a GPS to use for measurement.
c
Important:
While identifying a GPS, make sure you are
outside with no obstructions overhead, and try to
keep the device as still as possible.
outside with no obstructions overhead, and try to
keep the device as still as possible.
Operation buttons
A
Go to a location outside with no
obstructions overhead.
obstructions overhead.
B
Perform GPS positioning.
Press C.
GPD positioning starts.
When GPS positioning is complete, the
positioning complete screen flashes, and then the
measurement screen is displayed.
positioning complete screen flashes, and then the
measurement screen is displayed.
Note:
It usually takes less than two minutes to complete
GPS positioning.
It usually takes less than two minutes to complete
GPS positioning.
If it takes more than two minutes and Failed is
displayed, we recommend selecting Cancel,
moving to a different location, and trying again.
displayed, we recommend selecting Cancel,
moving to a different location, and trying again.
When the measurement screen is displayed, you can
start measuring.
U
start measuring.
U
“Measure” on page 37
Skipping GPS positioning
If you want to start measuring immediately, or if GPS
positioning is taking too long, select Skip during GPS
positioning and start measuring.
positioning is taking too long, select Skip during GPS
positioning and start measuring.
User Manual
Preparing and Basic Operations
31