Seiko Epson Corporation AP006 Manual De Usuario
Automatically Start/Stop
Measuring (AT Pause
Function)
Measuring (AT Pause
Function)
Measuring stops automatically when you stop running,
and resumes when you continue running.
and resumes when you continue running.
c
Important:
❏ When performing GPS positioning, make
sure the screen is facing up and you are
outside with no obstructions overhead.
outside with no obstructions overhead.
U
“Specifying a GPS (GPS Positioning)” on
page 30
❏ It usually takes less than two minutes to
complete GPS positioning.
If it takes more than two minutes and Failed
is displayed, we recommend selecting
Cancel
is displayed, we recommend selecting
Cancel
, moving to a different location, and
trying again.
Operation buttons
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
screen is displayed once positioning is complete.
Note:
❏ You can skip GPS positioning if you want to
start measuring immediately or if it is taking
too long.
too long.
U
“Skipping GPS positioning” on page 31
❏ Use indoor mode when GPS positioning
cannot be performed because you are indoors
and so on.
and so on.
U
“Indoor mode” on page 32
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
C
Select AT Pause.
Use C/D to select, and then press A.
D
Select ON.
Use C/D to select, and then press A.
User Manual
Measure
58