GatesAir Inc. UAXDVF Manual De Usuario
2/9/10
888-2711-001
1-3
WARNING: Disconnect primary power prior to servicing.
Section 1 Introduction
Maxiva UAX Transmitter Outdoor Enclosure System
User Manual
1.2
General Description
This section contains equipment/hardware location information of the UAX Enclosure
System. Included in this section will be photos of the various components, physical
location, interconnection, block diagram and system specifications.
System. Included in this section will be photos of the various components, physical
location, interconnection, block diagram and system specifications.
The UAX Outdoor Enclosure System is a self contained transmission system designed
to be installed in outdoor environments without the need of a shelter. The system
includes the Harris solid state UAX Transmitter, an on-board system air conditioning
system, and an on-board AC Power Distribution Box.
to be installed in outdoor environments without the need of a shelter. The system
includes the Harris solid state UAX Transmitter, an on-board system air conditioning
system, and an on-board AC Power Distribution Box.
There are three models system models:
•
UAX2000FLS Outdoor System -2Kw RF Power Level with Single Exciter
•
UAX2000FLD Outdoor System - 2Kw RF Power Level with Dual Exciters and
Transmitter Control Unit
•
UAX1000FLS Outdoor System- 1Kw RF Power Level with Single Exciter.
The transmitter cabinets utilize a rack mount system that accommodates additional
peripheral equipment including a UPS unit, mask filter, router, port server, monitoring
unit, and customer supplied satellite receivers, IRDs, etc.
peripheral equipment including a UPS unit, mask filter, router, port server, monitoring
unit, and customer supplied satellite receivers, IRDs, etc.
The self-contained system requires a stable/secure installation pad and external
connections. The external connections include:
connections. The external connections include:
1. Proper grounding
2. AC Mains
!
WARNING:
INSTALLATION OF THE AC MAINS AND GROUNDING MUST BE PERFORMED IN
ACCORDANCE WITH ALL APPLICABLE CODES.
ACCORDANCE WITH ALL APPLICABLE CODES.
3. Antenna coax
4. Customer data stream input
5. Remote control/monitoring
Figure 1-2 shows the front of the enclosure system with the door open.