Canon LV-7290 5318B002 Manual De Instrucciónes

38

Select 

Digital zoom +. The On-Screen Menu 

disappears and 

D. zoom + appears. Press the OK 

button to expand the image size. Use the Point 

▲▼◄► buttons to pan the image. The Panning 

function can work only when the image is larger 

than the screen size. A projected image can be also 

expanded by pressing the D.ZOOM 

+ or the OK button 

on the remote control unit. 

To exit the Digital zoom +/– mode, press any button 

except the D.ZOOM 

+/– buttons, OK and Point buttons.

Select 

Digital zoom –. The On-Screen Menu 

disappears and 

D. zoom – appears. Press the OK 

button to compress image size. 

The projected image can be also compressed by 

pressing the D.ZOOM 

– or the OK button on the remote 

control unit.  

To return to the previous screen size, select a screen 

size from the Screen Size Adjustment Menu or select 

an input source from the Input Source Selection Menu 

(see page 30) again, or adjust the screen size with the 

D.ZOOM 

+/– buttons.



 

• The  minimum  compression  ratio  is  limited 

depending  on  the  input  signal,  when  the 

Keystone  function  is  working  or  when  the 

custom is selected for the screen size.

  • 

True  and  Digital  zoom  +/–  are  disabled 

and  cannot  be  displayed  when 

480i,  575i, 

480p 575p, 720p,1035i or 1080i is selected 

in the PC System Menu (p.31).

  • 

Digital zoom +/- cannot be selected when 

True is selected.

  • The minimum compression ratio is limited at 

Normal screen size.

When this function is set to 

On, the picture will be top/

bottom and left/right reversed. This function is used to

project the image from a ceiling-mounted projector.

When this function is set to 

On, the picture will be 

left/right reversed. This function is used to project the 

image from rear of the screen.

To reset the adjusted data, select Reset and press the

OK button. A confirmation box appears and then select 

Yes. All adjustments will return to their previous figures.

This function is used to adjust keystone distortion of the  

projected image. Use the Point ▲▼ buttons to choose 

the item you want to adjust.

    To correct keystone distortion, press the OK button.  

Keystone appears on the screen. Use the Point ▲▼ 

buttons to correct keystone distortion (p.6).

    To store or reset the keystone correction, press the 

Point ► button.

Store .............  Keep the keystone correction 

even when the AC power cord is 

unplugged.

    

Reset .............  Release the keystone correction when 

the AC  power cord is unplugged.