NEC Corporation FC-N22A Manual De Usuario
101
S
e
tt
ing
B
B
IO
S
4.4.4 Tablet Button Submenu
The Tablet Button Submenu allows you to assign features to tablet buttons.
Option
Parameter
Description
Tablet Button 1
Tablet Button 2
Tablet Button 3
Tablet Button 4
Tablet Button 4
Tablet Button 5
[Tb] + Tablet Button 1
[Tb] + Tablet Button 2
[Tb] + Tablet Button 3
[Tb] + Tablet Button 4
[Tb] + Tablet Button 5
00h
00h ~ FFh
00h ~ FFh
Assign features to tablet buttons.
Enter the key codes to be set.
Key codes shown in the table below are only
available
If [0] is set to an option, the serigraphed standard
feature is enabled for the option.
If [FFFF] is set to an option, the feature of the option
is disabled.
Enter the key codes to be set.
Key codes shown in the table below are only
available
If [0] is set to an option, the serigraphed standard
feature is enabled for the option.
If [FFFF] is set to an option, the feature of the option
is disabled.
*Shaded value: Factory-set
The table below shows the correspondence between actual tablet buttons and options.
Tb
(1)
(2)
(3) (4)
(5)
No
Option
Usual feature
Feature of [Tb] + [Tablet button]
(1)
Tablet Button 1
Ctrl + Alt + Del
ESC
(2)
Tablet Button 2
Screen rotation
Tab
(3)
Tablet Button 3
Enter
Starting screen keyboard
(4)
Tablet Button 4
LCD brightness UP
PgUp
(5)
Tablet Button 5
LCD brightness Down
PgDn
The tablet buttons can only have the features listed in the table below. Do not specify any
values other than those in the table below.
Feature
Setting value
Ctrl+Alt+Del
0100 h
Screen rotation
*
E06D h
Enter
005A h
LCD brightness UP
0107 h
LCD brightness Down
0108 h
ESC
0076 h
Tab
000D h
Starting screen keyboard
*
E06A h
PgUp key
0075 h
PgDn key
0072 h
Keyboard backlight OFF
0101 h
Switching wireless LAN enabled/disabled
0102 h
Switching screen output port
0103 h
LCD backlight OFF
0104 h
FC button 1
*
E048 h
FC button 2
*
E03A h
* [Screen rotation], [Starting screen keyboard], [FC button 1] and [FC button 2] are enabled only in operation of
Windows
[FC Button 1] and [FC Button 2] can run the execution command (or application starts) registered
on the [FC Button Setup utility] dialog box.
on the [FC Button Setup utility] dialog box.