NEC Corporation FC-N22A Manual De Usuario
110
4.7 SYSTEM MENU
The System Menu allows you to set system features as described in the table below.
Option
Parameter
Description
System Management
Indicates system information.
If you move the cursor to this option and press Enter,
the relevant setting submenu appears on the screen.
If you move the cursor to this option and press Enter,
the relevant setting submenu appears on the screen.
System Part #
Indicates the product name of N22A.
System Serial #
Indicates the serial number of N22A (not used now).
BIOS Revision
Indicates the BIOS revision of N22A.
EC FW Revision
(View only)
Indicates the EC-FW revision of N22A.
Temperature Sensor
Disabled
Enabled
Enabled
Specify the temperature monitoring feature.
Set to [Disabled] to disable the temperature monitoring
feature at system booting.
Set to [Enabled] to enable the temperature monitoring
feature at system booting.
Set to [Disabled] to disable the temperature monitoring
feature at system booting.
Set to [Enabled] to enable the temperature monitoring
feature at system booting.
Upper Limit [°C]
75
Wide Range
Temperature Support：
80
Wide Range
Temperature Support：
80
Indicates the upper limit of the monitoring
temperature.
temperature.
Lower Limit [°C]
5
Wide Range
Temperature Support：
-25
Wide Range
Temperature Support：
-25
Indicates the lower limit of the monitoring
temperature.
temperature.
Voltage Sensor
Disabled
Enabled
Enabled
Specify the voltage monitoring feature.
Set to [Disabled] to disable the voltage monitoring
feature at system booting.
Set to [Enabled] to enable the voltage monitoring
feature at system booting.
Set to [Disabled] to disable the voltage monitoring
feature at system booting.
Set to [Enabled] to enable the voltage monitoring
feature at system booting.
POST Errors
Disabled
Enabled
Enabled
Specify the operation when an error is found during
POST.
Set to [Disabled] to have the system continue booting
if an error is found by the POST.
Set to [Enabled] to suspend booting if an error is found
by the POST and indicate the error content.
POST.
Set to [Disabled] to have the system continue booting
if an error is found by the POST.
Set to [Enabled] to suspend booting if an error is found
by the POST and indicate the error content.
HDD Thermal Sensor *1
Disabled
Enabled
Enabled
Specify the HDD temperature monitoring feature.
Set to [Disabled] to disable the HDD temperature
monitoring feature at system booting.
Set to [Enabled] to enable the HDD temperature
monitoring feature at system booting.
Set to [Disabled] to disable the HDD temperature
monitoring feature at system booting.
Set to [Enabled] to enable the HDD temperature
monitoring feature at system booting.
Illumination sensor
Disabled
Enabled
Enabled
Set the illuminance sensor.
If “Disabled” is selected, the illuminance sensor is
disabled.
If “enabled” is selected, the illuminance sensor is
enabled.
If “Disabled” is selected, the illuminance sensor is
disabled.
If “enabled” is selected, the illuminance sensor is
enabled.
LCD Mode
Normal
Enhanced
Enhanced
Change the LCD brightness level.
If “Normal” is set, the brightness is changed in the
range from the lowest to level 13.
If “Enhanced” is set, the brightness is changed in the
range from the lowest to level 16.
If “Normal” is set, the brightness is changed in the
range from the lowest to level 13.
If “Enhanced” is set, the brightness is changed in the
range from the lowest to level 16.
Self-Diagnostic Program
*Shaded value: Factory-set
*1: For wide temperature range HDD, “HDD Temperature Sensor” is not displayed.
*1: For wide temperature range HDD, “HDD Temperature Sensor” is not displayed.
Operations when temperature sensor is set to
“Use”
Monitor system temperature (internal temperature sensor) at power on (BIOS startup),
where an error message will appear, after BIOS startup is completed, if the temperature
is outside the range between upper and lower limits of the setting values.
The temperature sensor has a margin of error. In case of operating at temperatures
close to the lower limit of monitoring temperature, adjust the setting value if an error
message appears after BIOS startup is completed.
Do not change
where an error message will appear, after BIOS startup is completed, if the temperature
is outside the range between upper and lower limits of the setting values.
The temperature sensor has a margin of error. In case of operating at temperatures
close to the lower limit of monitoring temperature, adjust the setting value if an error
message appears after BIOS startup is completed.
Do not change
“Upper Limit of Monitoring Temperature” to a greater value since the main
unit internal temperature will rise after power is turned on.
This operation is performed only on startup, and will not be performed after the operating
system starts.
system starts.