NEC Corporation FC-N22A Manual De Usuario

2.12.3 LAN

The built-in 1000BASE-T LAN module allows N22A to connect with network. The module
supports the data transfer rate of up to 1000Mbps.

Connecting N22A to network

Insert one end of a LAN cable to the RJ-45 connector (LAN connector) on N22A to the
depth securely.

Insert the other end of the LAN cable to the network connector to the depth securely.

Setting LAN

Click [Start]

 [Control Panel]  [Network and Internet Connection]  [Network

Connections].

Double-click [Local Area Connection] to display the [Local Area Connection Status]
dialog box. Click [Properties].

The [Local Area Connection Properties] dialog box appears. Provide settings
appropriate for the connected network.

 While N22A operates, do not remove the LAN cable from the hub. If removed, the network

connection will be cut out.

 If the LAN cable is removed during network connection, immediate re-connection may be

able to recover the operation. If not, restart OS.

 During network communication through LAN, connect the AC adapter to N22A. Only the

battery can operate N22A for a rather short period.

 The suspend (standby) or pause state disables the network feature. During network

communication, do not enter N22A into the suspend (standby) or pause state.

 To run an application using network, enter N22A into the suspend (standby) or pause state

after asking a system administrator to confirm that the application may be used in suspend
(standby) or pause state.
Some applications may cause data to be lost when N22A is recovered from the suspend
(standby) or pause state.

  To connect N22A to network, a LAN cable sold separately is required.
  For gigabit communications, a cable supporting category 6 or 5e is required.
  If you do not know necessary components, contact a system or network administrator.