NEC Corporation FC-N22A Manual De Usuario
98
4.4.2 PCI Configuration Submenu
The PCI Configuration Submenu allows you to set features of PCI devices built in N22A.
Option
Parameter
Description
On Board LAN
Provide settings for on-board LAN devices.
If you move the cursor to this option and press Enter, the relevant setting
submenu appears on the screen.
If you move the cursor to this option and press Enter, the relevant setting
submenu appears on the screen.
LAN Controller
Disabled
Enabled
Enabled
Enable or disable wired LAN controller.
Option ROM Scan
PCI Express Card
Wireless LAN
Controller
Controller
Disabled
Enabled
Enabled
Enable or disable wireless LAN controller.
On Board USB
Provides settings for on-board USB devices.
If you move the cursor to this option and press Enter, the relevant setting
submenu appears on the screen.
If you move the cursor to this option and press Enter, the relevant setting
submenu appears on the screen.
USB Controller
Disabled
Enabled
Enabled
Enable or disable the USB controller.
Set to [Disabled] to disable even the USB2.0
controller. USB connectors become unavailable (I/O
lock).
Set to [Disabled] to disable even the USB2.0
controller. USB connectors become unavailable (I/O
lock).
USB 2.0 Controller
Disabled
Enabled
Enabled
Enable or disable the USB2.0 controller.
Set to [Disabled] to disable the USB2.0 controller.
USB devices operate in the USB1.1 specification.
Set to [Disabled] to disable the USB2.0 controller.
USB devices operate in the USB1.1 specification.
Touch Panel
GPS Controller
FingerPrint Sensor
Bluetooth Controller
Card Bus Device
CardBus Controller
IEEE1394 Controller
SD Card Slot
Memory stick Card
*Shaded value: Factory-set
4.4.3 I/O Device Configuration Submenu
The I/O Device Configuration Submenu allows you to set features of peripherals built in N22A.
Option
Parameter
Description
Serial port A
Disabled
Enabled
Enabled
Set to [Disabled] to disable serial port A (I/O lock) and
release the interrupt.
Set to [Enabled] to enable serial port A.
release the interrupt.
Set to [Enabled] to enable serial port A.
I/O Base Address
3F8
2F8
3E8
2E8
2F8
3E8
2E8
Specify the I/O base address of serial port A.
Interrupt
IRQ 4
IRQ 3
IRQ 3
Specify the IRQ of serial port A.
Internal Mouse
Disabled
Enabled
Enabled
Set to [Disabled] to disable the touch pad.
Set to [Enabled] to enable the touch pad.
Set to [Enabled] to enable the touch pad.
Touch Panel
Disabled
Enabled
Enabled
Set to [Disabled] to disable the touch panel.
Set to [Enabled] to enable the touch panel.
Set to [Enabled] to enable the touch panel.
Sound / Modem
Disabled
Enabled
Enabled
Set to [Disabled] to disable sound (makes the audio
controller disabled).
Set to [Enabled] to enable sound.
controller disabled).
Set to [Enabled] to enable sound.
Total Graphics Memory
Specify the graphic memory capacity.