Sangean Electronics 023 Manual De Usuario
Notice: The user should not modify or change this equipment without written
approval form SANGEAN ELECTRONICS INC. Modification could void
authority to use this equipment.
Label for end product must include “Contains FCC ID: BYG023” or “A RF
transmitter inside, FCC ID: BYG023”.
FCC ID Label Graph:
approval form SANGEAN ELECTRONICS INC. Modification could void
authority to use this equipment.
Label for end product must include “Contains FCC ID: BYG023” or “A RF
transmitter inside, FCC ID: BYG023”.
FCC ID Label Graph:
FCC ID: BYG023
Model: BM153-CB1-SJ
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note:
If the product is too small to make so many text labels, only need to indicate
the FCC ID number on the label, but the above text will be printed in the
manual or packaging box.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
No change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
The module has been regulatory approved for integrations which meet the
following conditions:
1. The radio integration is embedded
2. The antenna must be installed such that 20 cm is maintained between the
antenna and users
3. The ‘Type’ and ‘Gain’ of the antenna selected for the integration of the
external antenna must meet the requirements as detailed in section.
Used outside of these conditions will trigger re-approval.