Dongbu Daewoo Electronics Corporation 7NF92MO100N Manual De Usuario
19
The speedy cook function allows the oven to being cooking immediately on full power.
The speedy cook button has been pre-programmed to increase in increments of 30 seconds up to a maximum
time of 5 minutes.
The speedy cook button has been pre-programmed to increase in increments of 30 seconds up to a maximum
time of 5 minutes.
SPEEDY COOK
1. Press START/SPEEDY COOK button.
The oven will be " : 30" is displayed. MW indicator lights.
And the oven will start immediately. No need to press
START/SPEEDY COOK button.
The oven light comes on and the turn table starts rotating
and the time in the display will count down in seconds.
And the oven will start immediately. No need to press
START/SPEEDY COOK button.
The oven light comes on and the turn table starts rotating
and the time in the display will count down in seconds.
1. Open the door.
• Oven stops operating.
• You can restart the oven by closing the door and touching START/SPEEDY COOK button.
• You can restart the oven by closing the door and touching START/SPEEDY COOK button.
2. Press the STOP/CLEAR button.
• Oven stops operating.
• If you wish to cancel the cooking settings, press the STOP/CLEAR button again.
• If you wish to cancel the cooking settings, press the STOP/CLEAR button again.
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
ABNORMAL MESSAGE
• If the inside temperature of the oven is higher
than expected or the temperature sensor doesn't
work properly, "Err 2" message will be shown in
the display.
work properly, "Err 2" message will be shown in
the display.
• Unplug the power and call our technical service.
• When the temperature sensor is disconnected,
"Err 3" message will be shown in the display.
• Unplug the power and call our technical service.
▲