Dongbu Daewoo Electronics Corporation 7NFCMC523B Manual De Usuario
DESCRIPTION FOR D-SUB CONNECTOR
16
TROUBLESHOOTING
APPENDIX
Pin
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
11
12
13
14
15
11
12
13
14
15
Signal
Red
Green
Blue
GND
GND
GND
GND-Red
GND-Green
GND-Blue
Reserved
GND-H.Sync
GND-V.Sync
GND-V.Sync
Bi-directional Data(SDA)
Horizontal Sync
Vertical Sync(VCLK)
Data Clock(SCL)
1
6
15
10
*
GND=Ground
Check if POWER SWITCH and COMPUTER
POWER SWITCH are in the on position.
POWER SWITCH are in the on position.
Check if the signal cable is correctly connected to
the video card.
the video card.
Check if the pins of D-sub connector are not bent.
Check if the computer is in the power saving mode.
Check if POWER SWITCH is in the on position.
Check if the power cord is correctly connected.
Check if the signal cable is suitable to the video card.
Adjust H & V SIZE or H & V POSITION to get the
proper image.
proper image.
Keep the devices that may cause electrical
interference away from the monitor.
interference away from the monitor.
See the FCC information at the front cover of the
manual.
manual.
Operate DEGAUSS once.
Adjust CONTRAST and BRIGHTNESS.
Operate DEGAUSS once.
Adjust PINCUSHION/TRAPEZOID.
Symptom
No picture.
POWER LED is not
lit.
lit.
Image is unstable.
Image is not
centered, too small
or too large.
centered, too small
or too large.
Picture bounces or a
wave pattern is
present in the
picture.
wave pattern is
present in the
picture.
Color looks blotchy.
Picture is blurred.
Edges of available
area on the screen
are not straight.
area on the screen
are not straight.
Check