Comtek Communications Technology Inc BST75-216 Manual De Usuario

  Requires 12V DC at 200 mA source.

(Positive or negative center pin.)

  Selects the frequency on which the

transmitter will operate.  (See Frequency Information Section.)

  BNC connector provides a standard

50 ohm RF output for use with an external antenna.

  Adjusts the RF power output of the transmitter

(High-100 mW, Mid-50 mW, Low-25 mW).

AUDIO LEVEL CONTROL:  

This control is used to set the proper

modulation level when referenced with the VU meter.

  XLR-3 accepts balanced line level input.

1/4” phone jack accepts AUX input or 2-conductor electret microphone.

Page 7