Johnson Controls Interiors L.L.C. TMPSENS2400A Manual De Usuario
2 WRS-TTx Series Radio Frequency (RF) Wireless Transmitters Installation Instructions
Tools Needed
•
screwdriver for mounting screws
•
1/16 in. (2mm) Allen-head adjustment tool for
small screw that secures transmitter to
mounting base
mounting base
•
small straight blade screwdriver or coin for
unsnapping transmitter from base
Set up/Commissioning
Ensuring the batteries are installed and setting the
DIP switches appropriately are the only actions
required after mounting/installation.
DIP switches appropriately are the only actions
required after mounting/installation.
IMPORTANT:
Before specifying the
WRS Series RF Wireless Room Temperature
Sensing System for plenum applications, verify
acceptance of exposed plastic materials in
plenum areas with the local building authority.
Building codes for plenum requirements vary by
location. Some local building authorities accept
compliance to UL 1995, Heating and Cooling
Equipment, while others use different acceptance
criteria.
Sensing System for plenum applications, verify
acceptance of exposed plastic materials in
plenum areas with the local building authority.
Building codes for plenum requirements vary by
location. Some local building authorities accept
compliance to UL 1995, Heating and Cooling
Equipment, while others use different acceptance
criteria.
IMPORTANT:
Use this WRS Series
RF Wireless Room Temperature Sensing System
only to provide an input to equipment under
normal operating conditions. Where failure or
malfunction of the sensing system could lead to
personal injury or property damage to the
controlled equipment or other property, additional
precautions must be designed into the control
system. Incorporate and maintain other devices
such as supervisory or alarm systems or safety
or limit controls intended to warn of, or protect
against, failure or malfunction of the sensing
system.
only to provide an input to equipment under
normal operating conditions. Where failure or
malfunction of the sensing system could lead to
personal injury or property damage to the
controlled equipment or other property, additional
precautions must be designed into the control
system. Incorporate and maintain other devices
such as supervisory or alarm systems or safety
or limit controls intended to warn of, or protect
against, failure or malfunction of the sensing
system.
Diagram or Picture of the 80 X 120mm Sensor Enclosure with Dimensions
Figure 1: WRS-TTx Series RF Wireless Temperature and Set Point Transmitters
Dimensions, in. (mm)