Digital Monitoring Products Inc PC0086 Manual De Usuario
Digital Monitoring Products
7000 Series Keypad Installation Sheet
8
7000 Series Keypad Installation Sheet
Digital Monitoring Products
9
Additional Programming for 7064 and 7075 Thinline Keypads
The 7064 and 7075 keypads allow users to present a DMP 1400 Series proximity credential to a built-in proximity
reader that in turn sends their user code to the keypad. The built-in proximity reader is located in the keypad
backlit logo area. Users can also manually enter their user code into the keypad. The keypad verifies the user code
and its authority with the panel. Additionally, the 7075 powers its on-board Form C relay releasing a door strike
or magnetic lock. To provide added flexibility, the 7075 Keypad allows connection of an external Wiegand output
compatible reader.
Programming Cards into the System
This programming feature operates on 7064 and 7075 keypads only. Access the User Menu in one of two ways.
Programming Cards into the System
This programming feature operates on 7064 and 7075 keypads only. Access the User Menu in one of two ways.
When MENU? NO YES displays, present your proximity card to the reader or manually enter your user code into the
keypad.
From the User Menu, select USER CODES?. Choose ADD. At the ENTER CODE: - display, present the user card to the
From the User Menu, select USER CODES?. Choose ADD. At the ENTER CODE: - display, present the user card to the
reader. The keypad works by reading the 4 or 5-digit user code from the data sent by the access control reader. For
more information, refer to Entry Cards in the programming section of this document and the following User’s Guide
section on adding, deleting, and changing user codes.
User’s Guide
There are three different operating modes: Door Strike, Arming and Disarming, and Entry Delay. All of the examples
below assume that CLOSING CODE is YES in panel programming.
7064 and 7075 Keypad Arming and Disarming
Area system Arming and Disarming. Press CMD, the keypad displays ARM DISARM. Press the Select key under either
7064 and 7075 Keypad Arming and Disarming
Area system Arming and Disarming. Press CMD, the keypad displays ARM DISARM. Press the Select key under either
option. The keypad displays ENTER CODE: -. Present your card to the keypad or an external reader. Once validated
by the system, all areas accessible by your code arm or disarm automatically and the Door Strike relay activates.
ABC SECURITY
ARM
ARM
DISARM
ABC SECURITY
ENTER CODE: –
ENTER CODE: –
ABC SECURITY
ALL?
NO YES
Select NO to arm or disarm individual areas.
Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.
Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.
Figure 8: Area Arming and Disarming
All/Perimeter system Arming and Disarming. Press CMD, the keypad displays PERIM ALL (when arming) or DISARM?.
Press the Select key under the desired option. The keypad displays ENTER CODE: -. Present your card to the reader.
Once validated by the system, both areas arm or disarm automatically. On 7075 keypads, the Door Strike relay then
activates.
Home/Away system Arming and Disarming. Present your card to the reader. If the system is armed, once the card is
Home/Away system Arming and Disarming. Present your card to the reader. If the system is armed, once the card is
validated all areas are disarmed.