Digital Monitoring Products Inc PC0096 Manual De Usuario

The basic XT Series system is made up of an alarm panel with built in communications, an enclosure, a 16.5

VAC transformer, and a 12 VDC battery. You can add keypads to the system and auxiliary devices to the

panel’s open collector outputs to expand the system. Combined current requirements of additional modules

may require an auxiliary power supply. Refer to the Standby Battery Power Calculation section in this guide

when calculating power requirements. 

The system wiring diagram in Figure 1 on the following page, shows some of the accessory devices you can 

connect for use in various applications.  A description of each module follows.  

Metal Oxide Varistors and Transient Voltage Suppressors help protect against voltage surges on input and

output circuits.  This transient protection provides additional resistance to electrical surges such as lighting.  

Additional surge protection is available by installing the DMP 370 or 370RJ Lightning Suppressors.

Zone and Output Expansion Modules
710 Bus Splitter/Repeater

Allows you to increase keypad wiring distance to 2500 feet.

711 Single Point Zone Expander

Provides one Class B zone for connecting burglary devices and non-powered fire devices.

714, 714-8, 714-16 Zone Expander

Provides Class B zones for connecting burglary and non-powered fire devices.

712-8 Zone Expander

Provides 8 zones for connecting burglary devices.

715, 715-8, 715-16 Zone

Expander

Provides 12 VDC Class B powered zones for connecting smoke detectors, glassbreak

detectors, and other 2- or 4-wire devices.

860 Relay Output Module

Provides three additional sockets for expansion of up to four relays.

Interface Card
734 Wiegand Interface Card

Provides system codeless entry, and arming and disarming using access control readers.

DMP Two-Way Wireless Devices
1100D/1100DH/1100DI Wireless

Receiver

Supports transmitters in residential or commercial wireless operation off of the keypad bus.

Only needed for XT30

1101 Universal Transmitter

Provides both internal and external contacts that may be used at the same time to yield two 

individual reporting zones from one wireless transmitter.

1102 Universal Transmitter

Provides an external contact.

1114 Four-Zone Expander

Provides four wireless zones

1116 Relay Output

Provides one Form C relay

1117 LED Annunciator

Provides a visual system status indicator

1121 PIR Motion Detector

Provides motion detection with pet immunity.

1125 PIR Motion Detector

Provides multiple lens configurations, dual coverage area selection, and sensitivity adjustments.

1129 Glassbreak Detector

Detects the shattering of framed glass mounted in an outside wall and provides full-pattern 

coverage and false-alarm immunity.

1131 Recessed Contact

Provides concealed protection for doors, windows or other applications needing a discreet contact.

1139 Bill Trap

Provides a silent alarm option for retail and banking cash drawers.

1142BC Two-button Panic Belt

Clip Transmitter 

Provides portable two-button panic operation.

1142 Two-button Panic

Transmitter

Provides permanently mounted under-the-counter two-button panic operation.

1145 (Four-Button) 

1146 (Two-Button) 

1147 (One-Button)

Key Fob transmitters designed to clip onto a key ring or lanyard.