Digital Monitoring Products Inc PC0159 Manual De Usuario

Before starting to program, we recommend you read through the contents of this manual. The information in 
this document allows you to quickly learn the programming options and operational capabilities of the CellComSL

 

Series Cellular Alarm Communicator.
After this Introduction, the remaining sections describe the functions of each programming menu items along with
their available options. The communicator contains all of its programming information in an on-board processor 
and does not require an external programmer.
In addition to this manual, you should also be familiar with the following documents:
•  CellComSL Series Cellular Alarm Communicator User Sheet
•  CellComSL Series Cellular Alarm Communicator Programming Sheet

Included with each communicator are the Programming Sheets. These sheets list the various options available for
programming the communicator. Before starting, completely fill out the sheets with the programming options you
intend to enter into the communicator.
Having completed programming sheets available while entering data helps to prevent errors and can shorten 
the length of time you spend programming. Completed sheets also provide you with an accurate account of the 
communicator’s program you can keep on file for future system service or expansion.
The remainder of the Introduction explains starting and ending a programming session.

 

Ground Yourself Before Handling the Panel! Touch any grounded metal before touching the communicator 
to discharge static.
Remove All Power From the Panel! Remove all AC and Battery power from the communicator before 

installing or connecting any wires to the communicator.
The communicator should be completely installed before you begin programming. Make sure the communicator is 
properly grounded, and the AC and battery wires are correctly installed.

When programming a communicator for the first time or rewriting the entire program of an existing communicator, 
use the 

Initialization function described in section 7. Initializing clears the communicator’s memory of any old

data and sets the highest numbered user number to user code 99.

To access the programmer function of the communicator:
1.  Connect the keypad to the PROG header
2.  Press the reset button. 
3.  Enter the code 6653 (PROG).
4.  The keypad displays:

PROGRAMMER.

You are now ready to start programming the CellComSL

 Series Cellular Alarm Communicator. Pressing the

COMMAND key scrolls you through the programming menu items listed below.

Initialization

7

Output Options

13

Communication

8

Area Information

14

Messaging Setup

9

Zone Information

15

Remote Options

10

Stop

16

System Reports

11

Set Lockout Code

17

System Options

12

To select a section for programming, press any Select key/area when the name of that section displays on the

keypad. The detailed instructions for each programming step are found in this manual.