Honeywell International Inc. 8DL5800STAT Manual De Usuario
WIRELESS THERMOSTAT
5
69-1535
Fig. 8. Display of Installer Setup number
and settings.
CAUTION
Equipment Damage Hazard.
Electric heat and heat pump systems must
run with fan.
Configure to 1 in Installer Setup number 2 to
prevent equipment damage.
Electric heat and heat pump systems must
run with fan.
Configure to 1 in Installer Setup number 2 to
prevent equipment damage.
IMPORTANT
Only configured numbers are shown on the
device.For example: If thermostat does not
have a system key, Installer Setup Number 12
will not display. Review Table 3 factory settings
and mark any desired changes in the Actual
Settings column. When Installer Setup is com-
plete, review the settings to confirm they Mat-
thew system.
device.For example: If thermostat does not
have a system key, Installer Setup Number 12
will not display. Review Table 3 factory settings
and mark any desired changes in the Actual
Settings column. When Installer Setup is com-
plete, review the settings to confirm they Mat-
thew system.
M14618
INSTALLER SETUP
NUMBER DISPLAY
(COLUMN 2 OF TABLE 3)
NUMBER DISPLAY
(COLUMN 2 OF TABLE 3)
FACTORY SETTING OR OTHER
CHOICE DISPLAY (COLUMN 3
OR 5 OF TABLE 3)
CHOICE DISPLAY (COLUMN 3
OR 5 OF TABLE 3)