Westell Inc. A9081XXYY-07 Manual De Usuario
030-300479 Rev. A
Draft 1 – 10/17/05
030-300479 Rev. A
16
October 2005
User Guide
UltraLine IIB (Model A90-816030)
At the Edit Connection screen, complete the following steps to set up your connection profile:
1) Type
1) Type
your
Connection Name, Account ID and Account Password in the fields provided. The Account
Password field will be masked with asterisks for security purposes.
IMPORTANT: Initially, you must use the factory default connection name “MainPPP” to establish a PPP
session with your ISP. Then, if you want set up additional profiles, you may use connection names of your
choice.The Connection Name is the name associated each connection profile. The Account ID and Account
Password are provided by your Internet service provider and will be used for connection profile that you set up.
session with your ISP. Then, if you want set up additional profiles, you may use connection names of your
choice.The Connection Name is the name associated each connection profile. The Account ID and Account
Password are provided by your Internet service provider and will be used for connection profile that you set up.
2) At the field labeled Connection, select the connection type (Manual, On Demand, Always On) that you want to
use with this connection name. The factory default connection type is “Always On.”
3) Select the MRU Negotiation and LCP settings that you want to use with this connection name. For details on
these settings, refer to the following table.
4) Click
Save to save any changes that you have made to this screen.
5) Click
Back to return to the main Connection screen.
NOTE: If you click Back before you click Save, the previously saved settings will remain active, and any recent
changes that you have made to this screen will not take effect. You must click Save to save the settings.
changes that you have made to this screen will not take effect. You must click Save to save the settings.