Japan Radio Co Ltd. NTG337-EL2 Manual De Usuario
This manual describes important points to operate and maintain the
equipment. Read the related sections when operating, maintaining
and testing the unit. Do not try to carry out a test or maintenance not
covered in this manual.
This equipment is a precision machine. A failure may occur if you do
not observe the following:
• Do not jar or subject this equipment and the units to shocks.
• During operation, do not unplug the cable connected between the
wireless terminal’s user interface (26G-WIPAS2-WT-E) and the WT
adapter. Before unplugging this cable, first unplug the DC jack from
the WT adapter and turn the power off.
• Do not splash water on the WT adapter.
• Do not use this equipment in a place with excessive dirt or dust.
Before touching a power-receiving terminal, turn the input power off to
avoid electrical shocks.
not observe the following:
• Do not jar or subject this equipment and the units to shocks.
• During operation, do not unplug the cable connected between the
wireless terminal’s user interface (26G-WIPAS2-WT-E) and the WT
adapter. Before unplugging this cable, first unplug the DC jack from
the WT adapter and turn the power off.
• Do not splash water on the WT adapter.
• Do not use this equipment in a place with excessive dirt or dust.
Before touching a power-receiving terminal, turn the input power off to
avoid electrical shocks.
When installing the Access Point (AP), connect the ground wire to the
ground terminal. If the equipment is not grounded properly, you may
get electrical shocks when the equipment becomes faulty or shorted.
ground terminal. If the equipment is not grounded properly, you may
get electrical shocks when the equipment becomes faulty or shorted.
When using a measuring instrument, connect the ground terminal of
the measuring instrument to the ground terminal of this equipment. If
the equipment is not grounded properly, you may get electrical
shocks.
the measuring instrument to the ground terminal of this equipment. If
the equipment is not grounded properly, you may get electrical
shocks.
To avoid shock hazards, do not open and touch the inside or
adjustment points except for maintenance or inspection. If you modify
the equipment illegally, you may be punished according to the Radio
Law.
adjustment points except for maintenance or inspection. If you modify
the equipment illegally, you may be punished according to the Radio
Law.
Cautions
Do not touch the rack of the wireless terminal’s user interface (26G-
WIPAS2-WT-E) duirng operation because it becomes hot.
WIPAS2-WT-E) duirng operation because it becomes hot.
Do not touch the rack of the WT duiring operation because it becames hot.
・During operation, do not unplug the cable connected between the WT and
WT adapter.Before unplugging this cable, first unplug the DC jack from the
WT adapter and trun the power off.
WT adapter and trun the power off.